RRP Bearing Press & Extraction Tool and Adapters (sold separately)

  • $87.45
    Unit price per 
  • Save $22.78


Replacing your linkage and pivot bearings really helps to make your bike feel like new again. We find that a fresh set of bearings after a season of riding makes a noticeable difference.
It's also a great time to inspect your frame and give things a once over.
Performing a bearing replacement is not daunting task for a home mechanic and having the right tools will help save time and help prevent you from damaging your frame.

The RRP Bearing Press and Extractor Tool is very well rated for being a high quality tool that is your best priced option to get the right equipment.
In addition to the tool itself you will need one or multiple bearing adapters for the bearing size in your frame. RRP offer 20 different adapter kits so unless you wish to buy the full set, you need to identify the adapters that are needed for your frame. This is easy to do using the table on the website and order page listed below.

 

What do I need to order?

You need to order the tool and which ever bearing adapters are suited for your bearing sizes. 

Note: The tools and adapters all all sold separately.  To use the RRP Bearing press and Extraction Tool you will need the tool itself and the corresponding adapters for your bearings.

Use the table below to order the right bearing adapter for your bike

BEARING Name KIT NO RRP CODE BORE SIZE OD SIZE
688 2rs 1 BPET688 8 16
698 2rs / 398v 2 BPET698 8 19
608 2rs / 608E-2rs 3 BPET608 8 22
609 2rs 3a BPET609 9 24
6800 2rs / 61800 2rs 4 BPET6800 10 19
6900 2rs / 61900 2rs 5 BPET6900 10 22
6000 2rs 6 BPET6000 10 26
6801 2rs / 61801 2rs 6a BPET6801 12 21
6901 2rs / 61901 2rs 7 BPET6901 12 24
6001 2rs 8 BPET6001 12 28
3802 2rs / 63802 2rs / 6802 2rs / 61802 2rs 9 BPET63802 15 24
1526 2rs 10 BPET1526 15 26
6902 2rs / 6902E-2rs / 61902 2rs / 7902 11 BPET6902 15 28
6002 2rs 12 BPET6002 15 32
6803 2rs / 61803 2rs 13 BPET6803 17 26
17287 2rs 13a BPET17287 17 28
6903 2rs / 6903E-2rs / 61903 2rs / 61903E-2rs 14 BPET6903 17 30
6003 2rs 15 BPET6003 17 35
6804 2rs / 61804 2rs 16 BPET6804 20 32
6805 / 61805 2rs 17 BPET6805 25 37
Bearing Press & Extraction Tool(BPET) BPETHTB
BORE:
Bore hole size of bearing (hole in the centre)
OD:
Outer diameter of bearing race

 

If you need some help identifying which adapters you need, please just drop us an email at info@reciprocators.ca we are happy to help.

 

*Bearing Kits 1, 2 & 3 don’t have male adaptors (all are female adaptors) due to the small size of the bearing bore hole

 

Instructions for use

Firstly, ensure you have the correct RRP Bearing Kit to match the bearings you intend to insert / extract (see list below). You can identify which kit you need either by reading the bearing number written on the rubber seal, or you can measure the inner bore race and outer race of the bearing (as shown below) and match it to our list below

(NB: the handle arms have been reduced in length and thickness to decrease the torque available reducing the risk of damage from misalignment / incorrect installation)

Extracting Bearings (RED adaptors)

Place the RED adaptors from your RRP BEARING KIT as shown below, take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame. In particular check that the female adaptor cup is flush on the frame to prevent frame damage.

Wind on the main handle until the parts all come together, make a final check that everything is aligned properly. Continue to wind on the main handle which will allow the male adaptor to pull on the inner race of the bearing and extract it into the female adaptor cup (NB: The male adaptor passes through the female adaptor to ensure a uniform and true extraction*), it will become harder to turn once the bearing starts to extract. After a couple of turns stop and check that the bearing is extracting properly before continuing

Inserting Bearings (BLUE adaptors) - SOLD SEPARATELY

Place the BLUE adaptors from your RRP BEARING KIT as shown below, take time to ensure that all the parts fit flush and are aligned to prevent any damage to parts or frame.

Wind on the main handle until all the parts come together, the male adaptor should be pressing on the outer race of the bearing you are inserting. Make a final check that everything is all aligned. Continue to wind on the main handle, the male adaptor will press onto the outer race of the bearing and insert it (NB: The male adaptor passes through the female adaptor to ensure a uniform and true insertion*), it will become harder to turn once the bearing starts to insert. After a couple of turns stop and check that the bearing is inserting properly before continuing

Videos:
If you want to learn more about this, there are some great videos out there including this video from Island Bike Life:
Also this video from GMBN

 

Reviews

 

"The BPET makes what can be an awkward job much easier and more accurate, and helps with precise fitting without damaging beloved frames"

"The RRP tool is the best option for removing tricky linkage bearings without causing damage and keeps them correctly aligned saving you time in the long run"

"Proper maintenance can improve the life of your bearings massively" - MBUK


IMPORTANT NOTICE

RapidRacerProducts Ltd and Reciprocators Distribution accepts no liability for any damage caused, or consequential loss, arising from improper use of the Bearing Press & Extraction Tool, always use the Fitting Instructions provided. View printable fitting instructions

Our BEARING PRESS & EXTRACTION TOOL is designed, manufactured, and packed in the United Kingdom