RRP ProGuard Mini BOLT-On
Regular price
$62.99
$62.99
Sale
User reviews:
"The ProGuard The most tidy front fender available" No zip ties!"
"The quality difference between that other Bolt-on fender is obvious, the ProGuard is clearly a better purchase"
Designed to seamlessly bolt onto the back of the fork, the ProGuard mudguard offers a clean installation and great coverage for mud protection.
Utilizing the threads at the back of fork brace the Proguard simply bolts in place so you can say good bye to zip-ties.
Easily set up the perfect tire clearance with the tilt brackets supplied.
MINI & STANDARD COMPATIBILITY
- WHEELS: 26” 27.5” 29”
- TIRES: up to a 3” tire
- OFFSET: Minimum fork offset 44mm
- HUB: STD & BOOST
- Fork Compatibility
-
- 2022 FOX 34(b), 36(c), 38, 40
- (a)2020 FOX 40 (26” or 27.5”) or older needs Adapter Bracket (PGBOF40) – sold separately
- (b)2022 FOX 34 needs Stability Bracket if the rear of the brace is hollowed out (not available yet)
-
(c)2022 FOX 36 needs Stability Bracket (supplied)
____________________________________________________________________________________
NEW MARZOCCHI FORKS(d) (Fox chassis version) -
(d)Z2 forks may not come with threaded holes
____________________________________________________________________________________
2021 ROCKSHOX 35 - 2021 ROCKSHOX Recon (Gold / Silver)
- 2021 ROCKSHOX Paragon (Gold / Silver)
____________________________________________________________________________________
2019 OHLINS RXF34, RXF36, DH38(e) (or older) -
(e)DH 38 requires Stability Bracket (PGOSB) - sold separately. NOTE: above adapter also fits RXF36 and adds stability
____________________________________________________________________________________
2019 SR SUNTOUR FORKS (f) (or older) -
(f)forks that have an unthreaded straight through hole in the centre of the fork brace needs our SLEEVE PACK (PGBOSP) - sold separately
____________________________________________________________________________________
2021 DVO D1 Diamond Boost (g) - 2021 DVO D1 ONYX Boost SC (h)
- (g) needs our custom bolt / washer (PGBODVOB)
- (h)needs our custom adapter bracket and custom M4 bolt / washer (PGBODVO)
Reviews:

The ProGuard BOLT ON has many design features, take a look at the information below:
- FIRST LARGE DIRECT MOUNT MUDGUARD OF ITS KIND
- NO ZIP TIES OR VELCRO STRAPS
- NEATEST LOOKING LARGE MUDGUARD ON THE MARKET
- EASILY REMOVED IN SECONDS
- HEIGHT ADJUSTABILITY BY 6MM
- ANGLE ADJUSTABILITY FOR BETTER FIT IF NEEDED VIA 2 TILT BRACKETS
- 2 THICK RUBBER PADS TO PROTECT YOUR FORKS
- MINI SIZE – GREAT ALL YEAR ROUND MUDGUARD OFFERING GOOD PROTECTION
- STANDARD SIZE – OFFERS VERY HIGH LEVELS OF PROTECTION
- STICKER RECESS FOR EASY FIT AND STICKER PROTECTION
- OUR SPECIAL PROVEN POLYPROPYLENE MIX IS USED FOR MAXIMUM DURABILITY AND FIT
- BEAUTIFUL STYLING – EASY CLEAN MATTE TEXTURED FINISH WITH GLOSS HIGHLIGHTS
- LONG FRONT TO COPE WITH HIGH SPEED MUD AND SPRAY
- SMALL TURN DOWN AT FRONT TO DEFLECT SPRAY AND FOR BETTER TIRE CLEARANCE
- LONG REAR WITH RAISED FLICK OFFERS MORE PROTECTION ESPECIALLY WHEN THE WHEEL IS TURNED
- PROVEN SEAL SHIELD TO INCREASE FORK PROTECTION AND EXTEND SERVICE INTERVALS
DESIGN FEATURES IN MORE DETAIL
RUBBER PADS
The sides of the mudguard are flared out to touch and hold onto the fork to dampen resonance and create more stability, thick rubber pads have been included for the sides of the mudguard to protect the fork
BOLTS - Order replacement bolts in a bolt pack here
We had to design and manufacture our own custom M3 bolt as we couldn’t find one good enough to offer the wide clamping force and durability we needed. The following bolts come supplied in the packaging:
- M3 x 2 (FOX / MARZOCCHI)
- M4 x 3 (OHLINS)
- M6 x 1 (SR SUNTOUR)
TILT BRACKETS
We have included two TILT BRACKETS that just clip onto the front of the bracket allowing you to raise or lower the front for a better angle if needed, if any finer tuning is needed just zip the end you want to lower against the wheel and leave overnight
ALLEN KEYS
2 Allen keys have been provided in the packaging at just the right length to help you fit the mudguard
REAR FLICK
The raised rear flick was designed to simply offer a little bit more protection without adding extra length, it prevents more mud and spray from flying up the side of the frame especially when the wheel is turned
STICKER INDENT
The centre indent is a nice easy reference to apply our coloured stickers to, this indent also prevents the sticker from sitting proud on the surface of the guard which would leave it vulnerable to durability issues. The adhesive used is very special and super strong and can be jet washed
SEAL SHIELD
Our widely acclaimed Seal Shield offers greater protection for your fork seals from high velocity mud and spray lengthening service intervals
MATERIAL
We make our mudguard material thicker than the competition out there which together with our unique polypropylene mix allows massive impact protection, flexibility, and importantly cold weather durability and strength.
NB: If you don’t like the gloss highlights then spray the mudguard with GT85 and rub, this will remove the high gloss finish
BOLT PACKS - ORDER HERE
Additional full bolt packs can be purchased should you need them
SLEEVE PACK – SR SUNTOUR - ORDER HERE
Some SR Suntour forks have a straight through UNTHREADED hole in the centre of the fork brace, you can purchase a sleeve pack that allows you to fit the ProGuard BOLT ON to the fork